Energy efficient integrated LED downlight with loop-in loop-out wiring connections. Constructed from corrosion resistant thermal plastic & includes an aluminum heatsink. Ideal replacement for PLC CFL downlights. Instant full light output. Back lit design to ensure light is uniform within the beam not suitable for dimming.2.2.2
Constructed from corrosion resistant plastic. Hollow ring design with diffused light emitting from the inner surface. Wall-mounted 2000lm useful, 2200lm total lumens3000K warm white and 4000K cool white color option. Supplied with both ring style and full back mounting bracketBeam angel:120
LED surface mounted downlightLamp: Cree / 7WVoltage: AC 220-240V 50/60HzDriver: Electronic LED Driver includedFinish: Matt WhiteMaterial: AluminumCR!: Ra ≥80 Angle: 24° (Optional 15°/35°)
LED recessed mounted downlight. Lamp: Edison 1x3WVoltage: AC 220-240V 50/60HzDriver: Electronic LED Driver includedFinish: Matt WhiteMaterial: Aluminum CR!: Ra ≥80 Angle: 25°
LED recessed mounted downlight. Lamp: Cree / 18WVoltage: AC 220-240V 50/60HzDriver: Electronic LED Driver included Finish: Sand WhiteMaterial: AluminumCR!: Ra ≥80 Angle: 24° (optional 15°/35°)
Round body made of corrosion resistant die cast aluminum polyester powder coated in standard white. Diffuser is made of opal U.V stabilized vandal resistant polycarbonate. Internal anodized aluminum reflector for better reflectivitySurface / Wall mounted
A range of small and large circular wall mounted bulkheads with polycarbonate useLow copper content corrosion-resistant die-cast aluminum housing and frameStainless steel screwsDurable silicone rubber gasket and impact resistant UV stabilized polycarbonate di user.
Mains operated energy efficient integrated LED roundBulkhead, suitable for wall or ceiling mounting, indoors or outdoors with high impact IK10 rating. Long life, 35,000 hours maintenance free operationColor rendering index Ra>80Constructed from tough polycarbonate Built-in safety isolation control gear with short circuit protection.Can be converted to emergency option due to body design. Instant full light not suitable for Dimming
Mini Antara is a solar bollard light with 360 degrees of light effect, 2000lm output, various CCT from 2700K to 6500K with 100,000 hours lifetime for the light, PV solar panel on 4 sides, MPPT charging Mode, IP 65, working temperature up to 70 degrees
LED Neon Flex, 10w/lm, 1250 lumin , PVC D-shaped body material, input voltage, 12VDC, 24VDC, 220VAC, color choice of Red, Green, Yellow, Pink, Purple, White, Warm White, and RGB, DMX control option. Ip 68 .
Square LED fitting for ceiling and wall mounted, polycarbonate body, opal diffuser, Mounting Place: Wall mounted 1920lm. White polycarbonate body and ring, opal diffuser.Beam angle: 110°
Solar powered decorative Urban Light, With 45w, LED 360 deg light distribution,3000-4500Lm , equipped with motion sensor and light schedule , working Temp -15 deg celsius to 70-degree celsius , IP 65, MPPT working mode, 12 years life span and 5 years warranty
Polycarbonate body and opal diffuser. Excellent color rendering index >80Lumen maintenance >L70 at end of life. High performance reflector with different angle. Low energy consumption, saving >50%Mercury free, no UV or IROptions: Emergency
LED Bulkhead Polycarbonatre body and Opal Diffuser. Excellent color rendering index >80Lumen maintenance >L70 at end of life. High-performance reflector with different Angel. Low energy consumption, saving >50%Mercury free, no UV or IR
Epoxy powder coated die-cast aluminum bodyTherrmal management by a passive heat sink. Color rendering index >80Lumen maintenance >L70 at the end of lifeHigh performance reflector with a different angle. Low energy consumption saving exceed 50%Mercury free, no UV or IROptions: CRI >90, White / Black color
Epoxy powder coated die-cast aluminum. Color rendering index >80Lumen maintenance >L70 at end of life. Low energy consumption saving 50%Mercury free, no UV or IR
It is made of flame retardant glass-fiber reinforced polyesterPMMA opal diffuser Galvanized white polyester coated sheet steel. Injection molded polycarbonate with internal Prismatic surface and external smooth surface. Surface and suspension mounted. Stainless Steel Clips.
Epoxy powder coated die-cast aluminum body & opal diffuser. Excellent Color rendering index >80Lumen maintenance >L70 at the end of life. High performance reflector with a different angle. Low energy consumption saving exceed 50%Mercury free, no UV or IROptions: Emergency
Polycarbonate body and opal diffuser. Excellent Color rendering index >80Lumen maintenance >L70 at the end of lifeHigh performance reflector with different angle. Low energy consumption saving exceed 50%Mercury free, no UV or IROptions: Emergency
Epoxy powder coated die-cast aluminum. Color rendering index >80Lumen maintenance >L70 at the end of lifeLow energy consumption saving exceed 50% Mercury free, no UV or IROptions: Dimming
Epoxy powder coated machined aluminum body & trim. Thermal management by passive heat sink Color rendering index >80Lumen maintenance >L70 at end of lifeHigh performance reflector with different angle Low energy consumption saving 50%Mercury free, no UV or IR
Epoxy powder coated machined aluminum body & trim. Thermal management by a passive heat sink. Color rendering index >80Lumen maintenance >L70 at end of lifeHigh performance reflector with a different angle. Low energy consumption, saving >50%Mercury free, no UV or IR
Epoxy powder coated CRCA sheet steel body and machined aluminum trim, Recessed in mounted 3000K- 4000K- 5000KCRI > 80High performance reflector with a different angle
Epoxy powder coated CRCA sheet steel body & machined aluminum trim. Excellent thermal management by passive heat sinkExcellent color rendering index CRI 80+Lumen maintenance L70 at the end of lifeHigh performance reflector with a different angle. Low energy consumption saving exceed 50%Mercury free, no UV or IROptions: Dimming, Emergency, 90+ CRI
Rigid housing in CRCA sheet steel in a unique single piece construction, epoxy powder coated Optic: With prismatic diffuser Galvanized white polyester coated sheet steel. Injection molded polycarbonate with internal PrismaticRecessed mounted. Stainless Steel Clips.
Recessed to the Wall 12 Watt LED Spot Downlight, IP44 Super Bright Small SMD Unique LED Spot Downlight. The face cover and the lamp body are made of aluminum and molded through die-casting the surface is treated by dusting.
Body made of aluminum alloy and molded through die-casting Recessed mounted aluminum surface is varnished after brushing. This fitting creates extreme low heat and offers and excellent lumen performance.
Pure aluminum and is molded through extrusion, and then shaped by CNC machine3W LED recessed mounted spotlight fixture. The light transmission lens is made of PMMA, and the available angle options are: 15°,30°,45° High power LED light source is used and electric appliances are installed external
3*7W Triple Head Tiltable Square 180mA Adjustable 3000Kpowder coating finishing Hotel DownlightsThis product contains an aluminum die-cast front and heatsink complete with powder coating or oil painting finishing. This product creates extreme low heat and excellent lumenperformanceComplete with high light transmittance PC lens, available with several different beam angle. With Spring or Recessed mounting.
Pure aluminum body. aluminum die-cast heat sink and front complete with powder coating or oil painting finishing. Recessed in mounted downlight.2700-3000K8.24.36.60deg. The reflector of the product is made of pure aluminum and chrome plated complete with high light transmittance PC lens, available with several different beam angles
Aluminum die-cast front and a pure aluminum heat sink complete with powder coating.2700K-3000K, 180mA LED Driver, Recessed mounted downlight A range of PC lens is available with different beam angles IP 54
Aluminum die-casting body, powder coating finishing.30W LED. This product contains a combination of PC lens and aluminum reflector to achieve narrow beam performance. Available with different beam angles,interchangeable reflectors
Pure aluminum body. aluminum die-cast heat sink and front completes with powder coating or oil painting finishing. Recessed in mounted downlight.2700-3000K15.24.36.60deg
Die-Cast Aluminum Body Painted powder coating A range of PC lens are available with different beam angles. Finish: White/Black/Silver2700K - 6000KHeat resistance shock proof tempered glass diffuser
IP65 High waterproof 10W CREE COB LED recessed adjustable downlightPure aluminum die casting body. Completes with powder coating. Good radiator molded through die-casting good layout design and heat dissipation effect.CRI: Ra ≥80. Use spring installation, simple and convenient.
Aluminum housing, Powder coating finish Track Fixture, CRI>802700K / 4000KColor White / Black / Silver. High-performance reflector with different angle.1400lm
